Company News

HTLD S100 to cure TP 2500 LOCA

TP 2500 LOCA is a porfessional LOCA uv glue, mostly used in LCD fields.

Specifications

測試項目
PhysicalProperties

測試方法
Test method
規格參數     Specification
外観               
Appearance
Visual Inspection
Clear
黏度              
Viscosity
Brookfield RVT, 25℃, 20 rpm, spindle #3
2,300 - 2,800 mPa.s
比重                  
Density
Uncured Adhesive at 25℃
0.93 g/cm3
固化條件                 
Cure Condition
UVA: 250 to 420 nm,
2500 mJ/cm2
硬度                 
Hardness
ASTM D2240
E type 18 - 30
硬化深度                    
UV Curing Depth
Cured @100 mW/cm2 for 30s
>3.0mm
固化收縮率           
Volume Shrinkage
Density Meter
<2%
初固時間                 
UV Fixture Time
Cured @100 mW/cm2
<30 s
粘接強度            
Tensile Strength
Glass-Glass Cross Bonding
0.30 N/mm2
介電常數         
Dielectric Constant
1MHz
2.3~3.0
液態折射率       
Refractive index Liquid
Abbe at 25℃
1.5
固態折射率       
Refractive index Solid
Abbe at 25℃
1.51
透光率       
%Transmittance
At 550 nm
99.8% (>99%)
霧度                   
%Haze
ASTM D1003
0.13% (<0.3%)
黃指數               
Yellow Index-b*
ASTM D1925/C2
0.2 (<1.0)

Previous customer use traditional uv lamp like mercury to cure LOCA, but now Height-led figure out that TP 2500 can be cured by HTLD S100 uv led curing system completely and high performance. Curing time is in 3 seconds!

Youtube video: https://www.youtube.com/watch?v=kc4KSntqX7Y

Hits:  UpdateTime:2016-06-14 10:42:18  【Printing】  【Close

News

Contact Us

Address:Address:Office/ Factory address: 2/F, Tower B, Sanhe international science and technology Building, Lai Wu Shan New Village ,Da Lang Road,Long Hua District, ShenZhen, Guang Dong Province, China.
Zip:518109  
Tel:+86-755- 27381112          
Fax:+86-755-22718753  
E-mail:info@height-led.com  
Mobiled Phone:
    Mandi:   +86-18924589491
   Jerry:     +86-15112366475 
    Duke:     +86-13192028497
 
Skype:
   HTLD led uv curing-Mandi
   HTLD led uv curing-Jerry  
   HTLD led uv curing-Duke    
Website:www.height-led.com/en